| Specification | Details |
| Model | Atlas Sink 16S80A G2 |
| Firmware | Support AM32,ESCape32 |
| Voltage | 5S~16S Lipo |
| Peak Current | 160A(3S) |
| Continuous Current | 80A(70S); 50A(5 mins, under good heat dissipation condition) |
| RPM Wires | YES |
| RGB Wires(WS2812) | YES |
| Programming Tool | ESC Config Tool |
| Input Source Support | PWM / Dshot300 / Dshot600 |
| Data Transmission | TX Port |
| Weight | 47g |
| Application Scenarios | Fixed-wind Drone,Multi-rotor Drone,RC Aircraft,RC Car,RC Boat,Spraying Drone |
| Specification | Details |
| · Four high-current bus outputs | up to 120 A per output and up to 480 A total capacity. |
| · Independent dual BECs | efficient synchronous step-down outputs rated at 5 V / 8 A and 12 V / 6 A. |
| · Switchable 12VSW output | an active-low PIO signal controls power to peripherals. |
| · FC supply selection | solder pads select either 12 V or VBAT. |
| · Bus monitoring | high-side total-current CUR analog output and VBat/31 voltage output. |
| Specification | Details |
| Model | Falcon 4In1 8S100A G1 |
| Firmware | AM32_WBP_AT160G1_F421_2.19 |
| Voltage | 3S–8S LiPo |
| Peak Current | 120A (10s) |
| Continuous Current | 80A (45s); 45A (5 mins, under good heat dissipation conditions) |
| Programming Tool | ESC Config Tool |
| Input Signal Support | PWM / DShot300 / DShot600 / DShot1200 / OneShot / MultiShot |
| Data Transmission | TX Port |
| Dimensions | L42 × W44 × H9.6 mm (with pad) |
| Mounting Pattern | 30.5 × 30.5 mm, Φ4 mm / M3 |
| Weight | 33g |
| Applications | 5–10 inch FPV drones, 8S small and medium-sized industrial drones, HD camera drones, freestyle FPV |
| Specification | Details |
| Model | WBP Vortex 2810-900KV BLDC Motor |
| KV | 900 KV |
| Weight (with wire) | 65 g |
| Resistance (with wire) | 98.18 mΩ |
| Wire | 18# 260 mm |
| Pole | 12N14P |
| Voltage | 6S |
| No-Load Current (10V) | 0.76A |
| Shaft Diameter | 6mm |
| Power (MAX) | 814.33W (with 9*4.5*3 propeller) |
| Current (MAX) | 34.36A (with 9*4.5*3 propeller) |
| Thrust (MAX) | 2572g (with 9*4.5*3 propeller) |
| Specification | Details |
| Model | WBP Vortex 3115-900KV BLDC Motor |
| KV | 900 KV |
| Weight (with wire) | 111 g |
| Resistance (with wire) | 44.82 mΩ |
| Wire | 18# 260 mm |
| Pole | 12N14P |
| Voltage | 6S |
| No-Load Current (10V) | 1.69A |
| Shaft Diameter | 5mm |
| Power (MAX) | 1574.32W (with 10*5*3 propeller) |
| Current (MAX) | 67.25A (with 10*5*3 propeller) |
| Thrust (MAX) | 4221g (with 10*5*3 propeller) |
| Specification | Details |
| Model | WBP Vortex 4214-380KV BLDC Motor |
| KV | 380 KV |
| Weight (with wire) | 210 g |
| Resistance (with wire) | 69.44 mΩ |
| Wire | 16# 600 mm |
| Pole | 12N14P |
| Voltage | 8S |
| No-Load Current (10V) | 1.19A |
| Shaft Diameter | 6mm |
| Power (MAX) | 1381.21W (with 13*9*3 propeller) |
| Current (MAX) | 43.64A (with 13*9*3 propeller) |
| Thrust (MAX) | 4902g (with 13*9*3 propeller) |
