28
2026-09

7 kg Payload 10-inch Heavy-Lift FPV: WBP 4-in-1 AM32 ESC Field Test

Customer: RAIN, a WBP partner building large-frame, payload-carrying FPV drones. This case documents a 10-inch heavy-lift FPV quadcopter powered by the WBP 4-in-1 ESC (AM32 firmware, 3–8S, 100 UN), flown at 7 kg all-up weight.

Platform: 10-inch heavy-lift FPV quadcopter

Motors: 3115 900KV brushless

Props: Ruiyi 10-inch wide props

Power: 6S LiPo

All-up weight: 7 kg (with ballast)

Measured continuous current: ~80 A in loaded flight

ESC: WBP 4-in-1, AM32 firmware, 3–8S, 100 UN

10-inch heavy-lift FPV quadcopter with 6S battery, WBP 4-in-1 ESC power system

 

The 10-inch heavy-lift FPV quadcopter on the bench

Project Background

The customer flies 10-inch heavy-lift missions and prioritizes stable attitude under payload, sustained power, and ESC thermal behavior. The build uses 3115 900KV motors with Ruiyi 10-inch wide props on 6S. In sustained loaded flight the system holds roughly 80 A continuous.

ESC Selection

The customer chose the WBP 4-in-1 ESC (AM32 firmware, 3–8S, 100 UN):

  • Wide 3S–8S input range, covering the 6S pack.

  • 100 A continuous rating, comfortable margin over the ~80 A measured load.

  • Factory AM32 firmware, for tuning throttle filtering, timing, protection, and braking.

Close-up of WBP 4-in-1 ESC with four soldered motor wires and XT60 connector

Close-up of the 4-in-1 ESC: four motor phases soldered, XT60 power lead


Flight Test & Results

The customer ran an outdoor loaded test with two concrete bricks as ballast, reaching 7 kg all-up weight:

  • The airframe remained stable through the whole loaded sortie.

  • Continuous current held around 80 UN, ESC temperature stayed in the normal band.

  • No power reduction or thermal protection across long loaded segments.

  • Power margin felt sufficient for further payload growth.

Outcome

The WBP 4-in-1 AM32 ESC handled a 7 kg, ~80 A continuous heavy-lift flight without thermal throttling or protection events, validating it for 10-inch class payload platforms.

About Dongguan WBP Technology Co., Ltée.

Dongguan WBP Technology Co., Ltée. (WBP) manufactures 4-in-1 and single ESCs for FPV, long-range, and heavy-lift multirotor platforms, with AM32 and DroneCAN firmware options. Contact us for heavy-lift ESC selection and OEM development.

 

 

WBP Falcon 8S100A G1 4-in-1 AM32 ESC
WBP Falcon 8S100A G1 4-in-1 AM32 ESC — View product →

 

09
/
28

WBP Atlas Sink 16S160A G2 ESC Powers a 550-Class Aerobatic Helicopter at 208A Peak

Customer: a professional aerobatic (3D) helicopter pilot, known for demanding maximum control feel and power response. This case documents how the WBP Atlas Sink 16S160A G2 single ESC was selected, installed, and field-tested on a 550-class aerobatic helicopter, with ESCape32 firmware flashed at the factory. Platform: Nimbus 550V2 aerobatic helicopter Motor: Xnova 4025 830KV brushless […]

Envoyez-nous un message

Coordonnées