Home » Products » WBP Falcon 8S100A G1

WBP Falcon 8S100A G1

Specification	Details
Model	Falcon 4In1 8S100A G1
Firmware	AM32_WBP_AT160G1_F421_2.19
Voltage	3S–8S LiPo
Peak Current	120A (10s)
Continuous Current	80A (45s); 45A (5 mins, under good heat dissipation conditions)
Programming Tool	ESC Config Tool
Input Signal Support	PWM / DShot300 / DShot600 / DShot1200 / OneShot / MultiShot
Data Transmission	TX Port
Dimensions	L42 × W44 × H9.6 mm (with pad)
Mounting Pattern	30.5 × 30.5 mm, Φ4 mm / M3
Weight	33g
Applications	5–10 inch FPV drones, 8S small and medium-sized industrial drones, HD camera drones, freestyle FPV

Product Description

Key Features

High-performance CPU: core MCU: STM32G071, with high efficiency of 64MHZ.
Adapt optimized AM32 with fast response and excellent performance.
PCB structuring design: well-organized wiring and component layout, effectively separating the power terminals and signal terminals, enhancing the stability and utility of the ESC.Using a 8-layer design with a 3OZ thick copper layer as well as large-diameter copper strips on the main power lines, greatly increasing the current-carrying and heat dissipation capability.
Wide voltage input: support 3~8S Li-po input, suitable for 5-13 inches medium and low-voltage drones with X-Class structure.
Support multiple input source: once ESC was powered on, it will auto detect the throttle signal. Support Servo PWM, one-way Dshot(300,600,1200), both way Dshot(300,600).